Mevo Gen2 SimKit — Optoma ZW350ST Projector + Beaver Tail 4×5.5 Mat
By FlightScope
A Complete Indoor Simulator
At the Most Accessible Mevo Gen2 Price
The Mevo Gen2 SimKit pairs FlightScope’s portable Fusion Tracking launch monitor with an Optoma ZW350ST WXGA laser short-throw projector, a Beaver Tail 4×5.5 hitting mat, and the aluminum enclosure of your choice. It is the lowest-priced Mevo Gen2 SimKit in the lineup and a practical entry point for building a dedicated golf bay.
Unlike a floor-in-front camera monitor, the radar-based Mevo Gen2 sits on its included low tripod approximately 7–9 ft directly behind the ball on the target line. That rear placement needs room depth, but it keeps the hitting area clear and lets right- and left-handed golfers switch without moving the unit. Select an enclosure at checkout; the projector, compact hitting mat, install kit, and enclosure-matched landing mat are included.
FlightScope Mevo Gen2 — Radar Tracking That Stays Behind the Golfer
Mevo Gen2 combines FlightScope Fusion Tracking—3D Doppler Radar synchronized with image processing—to directly measure 20 data parameters across full swing, chipping, and putting. It operates from a compact low tripod behind the golfer, aimed down the target line, rather than from the floor in front of the mat.
Fusion Tracking
Patented 3D Doppler Radar plus synchronized image processing measures ball and club data from behind the golfer.
20 Data Parameters
Directly measured full-swing, chipping, and putting metrics with no required Mevo Gen2 subscription.
Shared-Bay Ready
Target-line placement means right- and left-handed golfers can alternate without relocating or realigning the unit.
Software Included
A lifetime E6 Connect bundle with 8 real-world courses is included; GSPro and Awesome Golf are compatible.
Allow approximately 7–9 ft behind the ball for the Mevo Gen2 and about 8 ft of ball flight to the screen. A total room depth of roughly 15–19 ft is the practical planning range for an indoor bay. For the best limited-flight indoor spin accuracy, use the included aluminum spin stickers or Titleist RCT balls. Use standard golf balls for putting.
Optoma ZW350ST — Value Laser Projection for the Mevo Gen2 Lineup
The Optoma ZW350ST is the entry-level laser projector choice in the Mevo Gen2 SimKit range. Its 3,600 lumens, WXGA widescreen resolution, short-throw format, and 20,000+ hour laser light source deliver an effective simulator display while keeping this complete package at the lineup’s lowest price point.
WXGA Widescreen
Value-oriented widescreen resolution for readable simulator visuals without the cost of a Full HD or 4K projector.
3,600 Lumens
Bright laser output suited to a dedicated golf simulator room and controlled ambient light.
Short Throw
Designed for close-to-screen mounting to help keep projection hardware clear of the swing space.
20,000+ Hour Laser
Long-life laser projection supports a permanent bay without periodic projector-lamp replacements.
Three Enclosure Sizes, One Complete SimKit
Every listed enclosure uses a tool-free aluminum frame and ships flat for assembly. Because Mevo Gen2 needs rear clearance behind the ball, plan overall room depth before selecting a screen size. The visual selector shows the three primary enclosure formats; available Shopify variants may include additional Pro formats.
Eagle 12 Enclosure
The versatile 12 ft-wide choice for a standard two-car garage or dedicated sim room. It provides a generous 4:3 screen while keeping the enclosure itself at a 60 in depth; evaluate the complete room depth separately for the rear-positioned Mevo Gen2.
Birdie 10 Enclosure
The narrowest visual selector option is suited to a single-car garage, basement lane, or tighter dedicated room. Its 4:3 screen and 6×12 landing mat retain the complete SimKit format while reducing screen width.
Albatross 13 Enclosure
The widest format gives a 16:9 screen and uses the larger 6×15 landing mat. It is the strongest match for rooms with depth to spare and shared bays where Mevo Gen2’s no-move lefty/righty placement will be used frequently.
Beaver Tail 4×5.5 Hitting Mat
The included Beaver Tail 4×5.5 mat gives a full single-sided stance platform, ideal for value-focused simulator bays. Its replaceable hitting-strip system is built to take the repetitive impact of simulator practice while preserving the rest of the mat for the long term.
Compact Stance
4×5.5 footprint gives a value-focused single-sided stance area for an indoor simulator bay.
Replaceable Strip
Swap the wear surface as needed without replacing the surrounding stance platform.
Joint-Friendly Feel
Realistic hitting-strip construction is designed to reduce impact through extended practice.
Long-Term Value
Stable floor protection and serviceable-strip design make it a sound permanent-bay component.
Mevo Gen2 SimKit — Eagle 12 Bay
Eagle 12 enclosure pictured for bay-scale reference. The Mevo Gen2 should be placed on its low tripod 7–9 ft behind the ball and aligned down the target line. Putting green not included in the standard SimKit.
What Completes the Build
The launch monitor, projector, enclosure, and hitting mat form the primary package. These included items complete the installation and launch-monitor setup.
Projector Install Kit
Projector ceiling mount, 25 ft HDMI cable, and 25 ft power cable are included to support the short-throw installation.
Landing Mat
Birdie 10 and Eagle 12 include a 6×12 landing mat. Albatross 13 includes a 6×15 landing mat, selected automatically with the enclosure.
Mevo Gen2 Setup Kit
The monitor includes its low tripod/kickstand, USB-C cable and power supply, aluminum spin sticker sheet, carry case, and quickstart guide.
What’s In The Box
- FlightScope Mevo Gen2 Launch Monitor
- Optoma ZW350ST 3,600-lumen WXGA laser projector
- Enclosure selected at checkout
- Beaver Tail 4×5.5 hitting mat
- Projector ceiling mount
- 25 ft HDMI cable and 25 ft power cable
- Landing mat: 6×12 or 6×15 by enclosure
- Mevo Gen2 low tripod/kickstand and carry case
- USB-C power supply and cable
- Aluminum spin sticker sheet
- Lifetime E6 Connect bundle with 8 courses
- Windows PC for GSPro or Awesome Golf (PC)
- Optional FlightScope Pro Package and Face Impact Location
- Putting green or flooring upgrades
SimKit Quick Specs
| Launch Monitor | FlightScope Mevo Gen2 |
| Tracking | Fusion Tracking: 3D Doppler Radar + image processing |
| Placement | Low tripod, 7–9 ft behind the ball on target line |
| Data Parameters | 20 measured full swing, chipping, and putting parameters |
| Software | E6 Connect, GSPro (PC), Awesome Golf (PC & iOS) |
| Projector | Optoma ZW350ST, 3,600 lumens, WXGA short-throw laser |
| Laser Life | 20,000+ hours |
| Hitting Mat | Beaver Tail 4×5.5 compact |
| Enclosure | Birdie 10, Eagle 12, Albatross 13, plus Shopify variant options |
| Landing Mat | 6×12 for Birdie 10/Eagle 12; 6×15 for Albatross 13 |
| Pricing | Varies by enclosure — see variant selector above |
| Shipping | Free UPS Ground, Continental US |
Why Choose This SimKit?
- Lowest-priced complete Mevo Gen2 SimKit in the lineup
- Laser short-throw projection at an accessible value tier
- Rear radar placement leaves the hitting area clear
- No repositioning when right- and left-handed golfers alternate
- Lifetime E6 Connect bundle with 8 courses included
Who This SimKit Is Built For
The Value Builder
Wants the lowest entry price in the complete Mevo Gen2 lineup without giving up laser projection or a quality hitting mat.
The Shared Bay
Hosts both right- and left-handed golfers and values target-line tracking that does not need to move between players.
The Radar Golfer
Prefers FlightScope Fusion Tracking and wants a portable launch monitor that can also travel to the range.
The Depth-Ready Room
Has sufficient room behind the hitting position for the Mevo Gen2’s 7–9 ft target-line placement.
Build Your Own or Compare Alternatives
Prefer a different projector tier, a fully custom mix of components, or an alternate launch-monitor experience? Review related Mevo Gen2 packages or begin a component-by-component configuration.
Mevo Gen2 with Optoma GT2400HDR
A similar value-oriented Mevo Gen2 configuration using an ultra-short-throw 1080P laser projector and Beaver Tail 4×5.5 mat. Consider it when projector placement constraints are the primary concern.
View GT2400HDR SimKitMevo Gen2 with BenQ AH700ST
Step up to a Full HD 1080P laser projector with the same Mevo Gen2 platform and the double-wide Beaver Tail 4×8.25 mat.
View AH700ST SimKitBuild Your Own SimKit
Select each launch monitor, projector, enclosure, and mat individually, then confirm the final layout around your room and budget.
Open Bundle BuilderGarmin R50 SimKit
Compare an alternate launch-monitor route with built-in touchscreen operation and a separate simulator ecosystem.
View Garmin R50 SimKitResources
Mevo Gen2 ZW350ST SimKit — FAQ
The ESG Advantage
A complete, accessible Mevo Gen2 simulator package selected for golfers building an indoor bay with straightforward component compatibility.
Purpose-Built Package
Launch monitor, projector, enclosure, mat, and accessory requirements are organized as one pre-configured SimKit rather than an uncoordinated component list.
Accessible Entry Point
The Optoma ZW350ST configuration is the lowest-priced Mevo Gen2 SimKit in the lineup, while still including laser projection and a Beaver Tail hitting mat.
ESG-Backed Support
Projector fitment, enclosure planning, launch-monitor placement, and simulator software setup can be addressed before and after purchase.
