VTrack SimKit — BenQ AH700ST + Carl's Place DIY Enclosure + HotShot Mat
Overhead Tracking, DIY Framing, and a Commercial-Grade Hitting Surface
This SimKit pairs the Laon Swingcraft VTrack Overhead Launch Monitor with a BenQ AH700ST 1080p laser projector, a build-it-yourself Carl’s Place enclosure sized to the room, and a Carl’s HotShot hitting mat sized to the golfer. Every enclosure size ships with a choice of Premium or High-Contrast Gray impact screen, and every mat size carries the same commercial-grade turf and stance platform.
Six enclosure footprints and four mat sizes mean this kit scales from a tight garage corner to a full two-car bay — without switching launch monitors, projectors, or install hardware.
VTrack Overhead — Ceiling-Mounted, Markerless Photometric Tracking
The Laon Swingcraft VTrack is a ceiling-mounted photometric launch monitor. Two stereoscopic high-speed cameras capture up to 1,800 frames per second, measuring the ball and club through impact from above and leaving the hitting area completely open.
Ceiling-Mounted Tracking
The floor stays clear. Nothing to trip over, and no hardware to reposition between shots.
Markerless Operation
No stickers, reflective dots, or specially marked balls for standard play. An optional marked ball mode is available.
Dual Stereoscopic Cameras
Two high-speed cameras running up to 1,800 fps read ball and club data optically from overhead.
25+ Ball & Club Parameters
Ball speed, spin rate, spin axis, launch angle, club path, face angle, attack angle, dynamic loft, and impact location.
Impact Video Feedback
Automatic slow-motion replay showing club path, face delivery, strike location, and gear-effect misses.
Right & Left Handed
A 31″ × 24″ hitting zone supports both handedness with no repositioning between players.
GSPro, E6 Connect & E6 Apex
Connects to GSPro, E6 Connect, and E6 Apex without workarounds, with shot feedback in roughly 200–250 milliseconds.
No Core Subscription
Core VTrack functionality requires no ongoing subscription. VTrack ToolKit and Practice Range are included.
VTrack requires a minimum ceiling height of 106″ (8’10″) for proper installation and tracking performance. Confirm ceiling clearance before ordering.
BenQ AH700ST — 4000-Lumen 1080p Laser Projection
A laser light source built for daylight-bright bays, with enough lumens to stay sharp even with ambient light in the room.
4000 Lumens
Bright enough for garages and bonus rooms with windows or overhead lighting left on.
1080p Full HD Image
Clear fairway and green detail in a value-focused simulator projection setup.
Short Throw Laser
Mounts close to the screen, reducing shadow interference from the golfer’s swing.
20,000-Hour Laser
No lamp replacements for years of regular simulator use.
Confirm throw distance and screen size for your chosen enclosure using the Projector Fitment Tool before finalizing your room layout.
Carl’s Place DIY Golf Enclosure Kit
A build-it-yourself pipe-and-fabric enclosure kit in six footprints, from a tight 8×8 corner setup to a full 9×12 two-car bay. Every size is available with a Premium Golf Impact Screen or a High-Contrast Gray Impact Screen for better ball flight visibility in bright rooms.
Not sure which footprint fits your room and this projector’s throw distance? Run your ceiling height and room depth through the Projector Fitment Tool before choosing an enclosure size.
Carl’s HotShot — Commercial-Grade Turf, Sized to the Golfer
A dense, commercial-grade turf mat with a stance platform on both sides of a replaceable hitting strip. Four sizes scale from a compact 4×5 setup to a 6×10 platform built for full-swing practice with a wide stance range.
VTrack SimKit — Carl’s Place DIY Bay
Pictured: Carl’s Place DIY Enclosure with Premium Golf Impact Screen. Room decor, flooring, and putting surfaces not included in the standard SimKit.
What Rounds Out the Install
Projector Install Kit
BenQ CM00G3 ceiling mount, 25ft HDMI cable, and 25ft power cable for a clean overhead run.
Landing Mat
6×12 landing mat for the four smaller enclosure sizes, 6×15 for the 8.5×11.5 and 9×12 footprints.
VTrack Impact Protector
Clear shield that mounts over the VTrack unit for added protection with a lifetime guarantee.
Everything Needed to Build This Bay
At A Glance
| Launch Monitor | Laon Swingcraft VTrack Overhead |
| Tracking Style | Ceiling-Mounted / Markerless Photometric |
| Cameras | Dual stereoscopic, up to 1,800 fps |
| Measured Data | 25+ ball and club parameters |
| Hitting Zone | 31″ × 24″ |
| Minimum Ceiling Height | 106″ (8’10″) |
| Handedness | Right & Left Handed |
| Simulator Software | GSPro, E6 Connect, E6 Apex |
| Projector | BenQ AH700ST (4000 lumens, 1080p Full HD) |
| Enclosure Sizes | 7.7×10 to 9×12 (6 options) |
| Impact Screen Options | Premium / High-Contrast Gray |
| Mat Sizes | 4×5, 4×9, 5×8, 6×10 |
| Landing Mat | 6×12 or 6×15 (enclosure-dependent) |
| Shipping | Free UPS Ground, Continental US |
| Price Range | $9,038.57 – $9,988.07 |
Why Choose This SimKit?
- Overhead tracking keeps the hitting area completely clear.
- Six enclosure footprints fit almost any garage or bonus room.
- DIY framing keeps upfront cost lower than a pre-fabricated bay.
- Choice of impact screen grade for rooms with more ambient light.
Built-to-Room Simulator Buyers
Garage Builders
Golfers building around fixed garage dimensions who need a specific footprint rather than a fixed-size enclosure.
Budget-Conscious DIYers
Buyers comfortable assembling their own frame in exchange for a lower total build cost.
Bright-Room Golfers
Anyone setting up in a room with windows or overhead lighting who wants the High-Contrast Gray screen option.
Multi-Golfer Households
Households that want the widest HotShot mat and enclosure combination for varied swing styles.
Other Ways To Configure This Bay
Build Your Own SimKit
Prefer a different launch monitor, projector, or enclosure brand entirely? Configure every component individually in the Bundle Builder.
Open the SimKit Bundle Builder →Same Kit, Different Projector
This same VTrack + Carl’s Place combination is also available with the Optoma ZK521ST-B, Optoma ZK608TST, or BenQ AK700ST projector.
View the Optoma ZK608TST Version →Plan The Install
VTrack Setup & Support
Setup guides, calibration steps, and post-purchase support for the VTrack launch monitor.
Open VTrack Support →Projector Fitment Tool
Confirm throw distance, mounting position, and ceiling clearance for your chosen enclosure footprint.
Open Fitment Tool →SimKit Bundle Builder
Select launch monitor, projector, enclosure, mat, and accessories individually.
Open Bundle Builder →SimKit FAQ
Which enclosure size should I pick?
Measure your room’s available width, depth, and ceiling height first, then use the Projector Fitment Tool to confirm the BenQ AH700ST’s throw distance fits your chosen footprint.
What’s the difference between the two impact screens?
The Premium Golf Impact Screen is a durable, high-quality projection surface for most rooms. The High-Contrast Gray Impact Screen improves image contrast and ball flight visibility in rooms with more ambient light.
How does the VTrack track shots?
VTrack is a ceiling-mounted photometric launch monitor. It uses two stereoscopic high-speed cameras capturing up to 1,800 frames per second to measure the ball and club through impact from above. It is an optical system, not a radar unit.
What simulator software does the VTrack work with?
VTrack connects to GSPro, E6 Connect, and E6 Apex without workarounds. VTrack ToolKit and VTrack Practice Range are included, and shot data can be exported to CSV.
Does the VTrack require a minimum ceiling height?
Yes. VTrack requires a minimum ceiling height of 106″ (8’10″) for proper installation and tracking performance. Confirm ceiling clearance before ordering.
Does the VTrack require marked clubs or stickers?
No. Markers, stickers, and reflective dots are not required for standard simulator play. Golfers use a standard golf ball and their own unmodified clubs. An optional marked ball mode is available for those who prefer it.
Is a subscription required to use the VTrack?
No ongoing subscription is required for core VTrack functionality. GSPro and E6 platforms set their own licensing terms independently.
What data does the VTrack measure?
VTrack measures 25+ ball and club parameters, including ball speed, launch angle, launch direction, spin rate, spin axis, carry and total distance, apex height, club speed, club path, face angle, face-to-path, attack angle, dynamic loft, and impact location.
What’s included in this SimKit?
Laon Swingcraft VTrack Overhead Launch Monitor, BenQ AH700ST projector, your selected Carl’s Place DIY enclosure size and screen type, your selected Carl’s HotShot mat size, VTrack Impact Protector, BenQ CM00G3 ceiling mount, 25ft HDMI cable, 25ft power cable, and a landing mat sized to your enclosure.
What is the VTrack Impact Protector and why is it included?
It is an in-house Elite Sim Golf accessory that shields the VTrack unit from errant ball strikes. Because VTrack mounts above the hitting zone, it can sit in the path of shanks, topped shots, and mishits, so the protector ships as a standard accessory.
Do I need to assemble the enclosure myself?
Yes. The Carl’s Place DIY Enclosure Kit is a build-it-yourself pipe-and-fabric system. It ships with framing hardware and instructions; no welding or specialty tools are required.
What’s included with the mat?
Each Carl’s HotShot mat ships with the standard hitting strip installed. Foam and gel divot strip upgrades are available separately on the standalone mat product page.
Why does the landing mat size change?
Enclosures at 7.7×10, 7.7×13, 8×8, and 8×10.5 ship with a 6×12 landing mat. The two largest footprints, 8.5×11.5 and 9×12, ship with a 6×15 landing mat to match the larger floor area.
Does this kit support left-handed golfers?
Yes. VTrack mounts overhead in front of the hitting zone and supports both right- and left-handed golfers with no repositioning. The hitting zone measures 31″ × 24″.
Can I customize this kit further?
Yes. Use the SimKit Bundle Builder to swap any individual component for a different brand or model.
How does this SimKit ship?
This SimKit ships free via UPS Ground to the Continental US. Elite Sim Golf provides setup guidance from the time your order ships through your first sessions in the bay.
A Simulator Bay Sized To Your Room, Not The Other Way Around
Six Footprints
From an 8×8 corner to a 9×12 full bay, the enclosure fits the room instead of forcing a remodel.
Overhead Tracking
VTrack stays out of the swing path completely, with no floor sensors to damage or reposition.
Built By You, Backed By ESG
DIY assembly keeps costs down, while Elite Sim Golf support stays available through setup and beyond.
