Roller Ace Motorized Retractable Golf Simulator Screen
A Premium Motorized Screen for a Bay You Already Have
Roller Ace is a single-roller motorized projection screen built for golfers who already have an enclosure, a netted bay, or a dedicated room and just need a serious screen to finish it. A quiet electric roller raises and lowers a wrinkle-resistant, ball-tracking-ready screen fabric on command, with the remote control included. Roller Ace is screen-only — it ships without side walls, netting, or enclosure panels, so it is best paired with an existing simulator room, net enclosure, or one of the enclosure kits below.
Roller Ace — The Screen Upgrade for a Bay That's Already There
Roller Ace is not a full enclosure kit. It is the motorized screen component for golfers who already have side netting, framed walls, or a dedicated room and want to replace a fixed screen with a cleaner, retractable one. When it is not in use, the screen rolls up out of the way instead of hanging as a fixed panel.
Wrinkle-Resistant Screen Fabric
The projection fabric is designed to stay smooth and taut for accurate golf ball tracking, without the wrinkling that degrades tracking accuracy on lower-grade retractable screens.
Motorized Electric Roller
A motorized roller raises and lowers the screen smoothly and quietly, so it can retract fully out of the way rather than staying stretched across the bay at all times.
Remote Control Included
The included remote drives the roller directly, so the screen can be deployed or stowed without reaching for a wall switch or pull cord.
Two Size Options
Roller Ace ships in a 9'10″ wide or 9'2″ wide configuration, both at 9'6″ tall, to match different bay widths without oversizing the screen.
Ceiling or Wall Mount
Installation hardware supports mounting the roller housing to the ceiling or the wall, whichever fits the framing already in place in the room.
Screen-Only Design
Roller Ace includes the roller, screen, remote, and mounting hardware only — no side walls or enclosure panels — so it drops into an existing net enclosure or framed room without duplicating structure already built.
Built for a Screen Upgrade, Not a Full Enclosure Build
Roller Ace fits golfers who already have containment sorted out, whether that is framed walls, hanging netting, or a fully finished room, and just want a better screen inside it.
The Existing-Enclosure Owner
For golfers who already have side walls or netting in place and want to swap a fixed or aging screen for a motorized, retractable one.
The Multi-Use Room Builder
For garages, basements, and bonus rooms that serve double duty, where a screen that rolls up out of the way keeps the space usable for other things.
The Net-Enclosure Upgrader
For simulator setups built around a net enclosure or cage that need a dedicated, tracking-accurate projection surface without adding a full panel structure.
The DIY Room Finisher
For golfers finishing a simulator room from scratch who plan to build or already have framing and just need the roller, screen, and remote to complete it.
Roller Ace Screen Dimensions
Roller Ace is available in two width options, both sharing the same height, so the screen can be matched to the bay without going wider than the room allows.
Size Option 1
Size Option 2
Roller & Mount
What's Included
Pair Roller Ace With an Enclosure
Roller Ace supplies the screen. For golfers who still need the surrounding structure, these enclosure options from the current lineup add the walls, netting, or panels Roller Ace does not include.
Fold-Away Enclosure
- Full side-wall containment
- Folds away for shared-use garages
- Pairs with a fixed or retractable screen
- Good match for Roller Ace's screen-only design
SkyDrop Enclosure
- Motorized enclosure to match Roller Ace's motorized screen
- Side containment without a permanent structure
- Ceiling-mount design keeps the floor clear
- Complements a retractable-screen setup
Prefer a Traditional Bay?
- Complete enclosure with frame, screen, and lining
- Proven steel-tube frame construction
- Multiple widths and screen ratios
- Best for a single all-in-one purchase
Roller Ace Pairs With Any Short-Throw Projector
Roller Ace is the screen, so pairing it with the right short-throw projector is the only step left on the image side. Either of these two short-throw models work well with Roller Ace's screen sizes — use the Projector Fitment Tool to confirm mounting distance for the specific room.
BenQ AK700ST
- 4K UHD resolution
- 4,000 ANSI lumens
- Throw ratio 0.69–0.83
- Laser light source, 20,000 hr
- Auto Screen Fit, Golf Mode, IP5X
Optoma GT2400HDR
- 1080p resolution
- 4,200 ANSI lumens
- Throw ratio 0.496:1 fixed
- DuraCore Laser, 30,000 hr
- 8.4ms lag, IP6X, HDR10/HLG, 360°
Not Sure Which Projector Fits Your Room?
Use the Projector Fitment ToolPair the Roller Ace with a Complete SimKit
Roller Ace is the screen foundation. These pre-configured SimKit packages pair it with a launch monitor, projector, and hitting mat — everything needed for a complete simulator in one order. Because Roller Ace is a new SKU, contact for current enclosure options at checkout.
VTrack Premium 4K SimKit
- VTrack Overhead Launch Monitor
- BenQ AK700ST 4K laser projector
- Enclosure choice at checkout
- Ideal for a premium, fully finished overhead bay
Eye Mini Lite 12FT SimKit
- Uneekor Eye Mini Lite — ground-based, camera-driven tracking
- BenQ short-throw 1080p laser projector
- 12FT enclosure plus Elite ProTee mat and landing pad
- Best where ceiling mounting is not preferred
Get the Right Screen Size for Your Room
Choosing between the 9'10″ and 9'2″ widths, and matching Roller Ace to an existing enclosure or net setup, comes down to room measurements and mount type. The Elite Sim Golf team can help confirm room fit, mount placement, and projector pairing before ordering.
Talk to a Simulator SpecialistRoller Ace Questions
How much room do I need for Roller Ace?
Roller Ace ships in two widths, 9'10″ or 9'2″, both at 9'6″ tall. Beyond the screen footprint, the room needs enough ceiling or wall clearance for the roller housing and enough depth in front of the screen for the projector throw and swing.
Does Roller Ace include side walls or an enclosure?
No. Roller Ace is a screen-only product — the main roller, projection screen, installation hardware, and remote control are included, but there are no side walls, netting, or enclosure panels. It is built to install inside an existing enclosure, net cage, or finished room, not to replace one.
What is included with Roller Ace?
The package includes the main motorized roller, the wrinkle-resistant projection screen, ceiling or wall installation hardware, and a remote control for operating the roller.
Is a hitting mat included?
No. A hitting mat is not included and is sold separately, so the hitting surface can be matched to the room, budget, and performance needs.
Can I use Roller Ace with any launch monitor?
Yes. Roller Ace is a screen and does not interact directly with launch monitor tracking, so it works with both ceiling-mounted overhead launch monitors and ground-based units.
What projector works with Roller Ace?
The BenQ AK700ST is the premium 4K option and the Optoma GT2400HDR is the best-value laser option. The GT2400HDR uses an ultra-short 0.496:1 throw and should be verified against any ceiling-mounted overhead monitor bracket. Always confirm mounting distance with the Projector Fitment Tool before purchasing.
How does the motorized roller work?
Roller Ace uses a motorized electric roller that raises and lowers the screen smoothly and quietly. The included remote control drives the roller directly, so the screen can be deployed for a session and stowed out of the way afterward.
Can Roller Ace be moved or relocated?
Roller Ace mounts to the ceiling or wall using the included installation hardware. Because it is a fixed mount, relocating it means uninstalling and remounting the roller housing at the new position rather than simply moving it.
Does it work for both right- and left-handed golfers?
Yes. The screen itself is not handedness-specific, so it works for both right- and left-handed setups as long as the surrounding room or enclosure provides the swing clearance needed.
Can I upgrade to a complete simulator package?
Yes. Roller Ace can be paired with a launch monitor, projector, and mat through a pre-configured SimKit or the SimKit Bundle Builder for a complete setup. Because Roller Ace is a new SKU, contact the team for current enclosure options at checkout.
What size should I choose — 9'10″ or 9'2″?
Both sizes share the same 9'6″ height, so the choice comes down to available width. The 9'10″ option suits wider bays, while the 9'2″ option fits narrower rooms or setups with tighter side clearance. Contact the team to confirm the right width for a specific room.