SkyDrop Motorized Golf Simulator Enclosure
The Enclosure That Disappears Into the Ceiling When the Round Is Over
SkyDrop mounts flush to the ceiling and lifts the entire screen and side enclosure out of the way at the push of a button, then drops it back into hitting position in seconds. For garages, bonus rooms, and multi-use bays that need to go from full swing bay to open floor and back, the retraction happens overhead — not against a wall, not folded into a corner, but lifted clean out of the room.
Why SkyDrop
Ceiling-Mounted Lift System
Three 118″ main shafts and two 51″ side shafts hang from ceiling brackets, iron plates, and screws rather than standing on floor-mounted steel tubing, so the entire frame lifts up and out of the play area instead of sitting fixed in the room.
Remote-Controlled Drop
A remote control drives the motorized lift, dropping the screen and side enclosure into hitting position or raising it back toward the ceiling without touching a single bracket or screw once installed.
Full Retraction, Not Just Folding
Where a wall-folding enclosure collapses sideways against a wall, SkyDrop pulls the whole structure up and out of the floor plan, clearing the bay for a car, a workout rack, or anything else the room needs to do when golf is not on the agenda.
Impact Screen + Blackout Side Fabrics
The front hitting screen and side blackout fabrics attach via heavy-duty Velcro, so panels stay taut during play and come off cleanly for cleaning, replacement, or storage during transport.
Weighted for a Clean Drop
Four weighting bars keep the lowered screen hanging flat and stable during play, and four rubber end caps protect the shaft ends and surrounding trim on every lift and drop cycle.
Complete Installation Hardware Kit
Brackets, screws, and iron plates for the ceiling mount ship with the unit, so the shafts, motor, and fabric panels are the only major components to plan around during install.
Who SkyDrop Is Built For
Shared Garage Bays
When the garage still needs to park a car or host a workout bench between sessions, lifting the enclosure into the ceiling clears the floor completely, not just to one side.
Multi-Use Bonus Rooms
Home theaters, playrooms, and flex spaces that double as a sim bay benefit from a screen that vanishes overhead instead of remaining visible as a folded wall panel.
Tech-Forward Builders
Golfers outfitting a dedicated smart-home style setup who want push-button operation to match the rest of a connected simulator room.
Near-Square Rooms
The 118″ x 118″ practice area suits rooms that are closer to square than long and narrow, where a near 1:1 screen footprint uses the space efficiently.
SkyDrop Specifications
Core Dimensions
Construction
Assembly & What’s Included
Pair SkyDrop With the Right Setup
Fold-Away
- Folds flat against a wall when not in use
- Lower-cost path to a reclaimable bay
- Good fit when ceiling mounting is not possible
Roller Ace
- Motorized roll-up screen without full side enclosure
- Pairs with an existing frame or open bay
- Fastest overhead retraction for screen-only setups
Prefer a Traditional Bay
- Birdie 10, Eagle 12, Albatross 13, and Pro Series 12x9
- Static frame, no lift or fold mechanism
- Straightforward install for a dedicated, permanent bay
Projectors That Pair With SkyDrop
BenQ AK700ST
- True 4K UHD resolution
- Short-throw lens for tight rooms
- High brightness for daylight bays
- Low input lag for real-time swing feedback
Optoma GT2400HDR
- Ultra-short throw for minimal mount distance
- HDR support for vivid course graphics
- Budget-friendly 1080p option
- Compact footprint for small bays
Not sure what fits your room
Use the Fitment ToolPair the SkyDrop with a Complete SimKit
VTrack Premium 4K SimKit
- VTrack launch monitor with premium tracking accuracy
- 4K short-throw projector included
- Impact screen and mounting hardware
- Full installation support
Eye Mini Lite 12FT SimKit
- Eye Mini Lite launch monitor
- 12-foot depth compatible setup
- Impact screen and mounting hardware
- Straightforward install
Get SkyDrop Sized Right for Your Room
Ceiling height, joist spacing, and clearance around the lift shafts all matter for a clean install, and the team can walk through room fit and configuration for SkyDrop before it ships. A quick conversation up front avoids surprises on install day.
Talk to a Simulator SpecialistSkyDrop FAQ
How much room does SkyDrop need
SkyDrop’s practice area is 118″ W x 118″ H x 51″ D (approximately 9’10″ W x 9’10″ H x 4’3″ D). Ceiling height and structural mounting clearance for the lift mechanism should be confirmed for the specific room before install.
What is included with SkyDrop
SkyDrop ships with three 118″ main shafts, two 51″ side shafts, a golf impact screen, side blackout fabrics, 4 weighting bars, 4 rubber end caps, a remote control, and a complete installation hardware kit (brackets, screws, iron plates).
Is a hitting mat included
No. A hitting mat is not included and is sold separately.
Can SkyDrop be used with any launch monitor
Yes. SkyDrop is an enclosure and screen system, not a launch monitor, so it works alongside most camera-based or radar-based launch monitors positioned according to the manufacturer’s recommended placement.
What projector works with SkyDrop
Use the Fitment Tool to match a projector to the room’s throw distance. The Optoma GT2400HDR is an ultra-short throw option, and extra care is needed when mounting it near SkyDrop’s ceiling lift shafts to avoid clearance conflicts.
How does the motorized lift mechanism work
SkyDrop mounts to the ceiling using brackets, iron plates, and screws. A remote control drives the electric lift motor, dropping the screen and side enclosure into hitting position or retracting the whole structure back up toward the ceiling in one motion.
What are the power requirements for SkyDrop
SkyDrop’s lift motor requires a standard electrical connection near the ceiling mount point. Exact voltage and amperage draw are [PLACEholder — confirm] and will be confirmed before publishing; plan for an accessible outlet or dedicated circuit near the installation location.
Can SkyDrop be moved or relocated
Relocation is more involved than with a floor-standing frame, since the shafts, motor, and hardware kit are mounted directly to the ceiling structure. Moving SkyDrop to a new room means removing and reinstalling the ceiling brackets and iron plates at the new location.
Does SkyDrop work for both right- and left-handed golfers
Yes. The enclosure and screen are symmetrical, so the bay accommodates right- and left-handed swings without reconfiguration.
Can SkyDrop be upgraded into a complete SimKit package
Yes. SkyDrop pairs with either the VTrack Premium 4K SimKit or the Eye Mini Lite 12FT SimKit. Since SkyDrop is a new SKU, contact the team for current enclosure options at checkout while bundle listings are updated.
Can the remote control be used to set custom drop positions
The remote operates the lift/drop cycle between the fully retracted ceiling position and the fully lowered play position. Custom intermediate stop positions are [PLACEholder — confirm] pending confirmation of the motor controller’s capabilities.