ProTee VX Overhead Launch Monitor Premium 4K Package (Carl's Place DIY Enclosure + Optoma ZK521ST-B)
SIMKIT BUNDLE INCLUDES:
8 items
x1
x1
x1
x1
x1
x1
x1
x1
Complete Golf Simulator Package
A Full Overhead Simulator Bay, Configured Around ProTee VX
The DIY-value build: the ProTee VX Overhead Launch Monitor paired with the made-to-order Carl’s Place DIY Enclosure Kit instead of a fixed Elite enclosure, plus the Optoma ZK521ST-B 4K Projector. The Carl’s Place kit is sized to your room with a floor-to-turf impact screen and BlackStop™ surround.
This is not a parts list. It is a complete simulator foundation — launch monitor, projector, enclosure, hitting mat, floor coverage, and install accessories — with the support to back it up. Professional installation is available; see the installation services page.
Launch Monitor
ProTee VX Overhead
Projector
Optoma ZK521ST-B
Enclosure
Carl's Place DIY Enclosure
Hitting Mat
Beaver Tail 4ft × 8.25ft
Featured Launch Monitor
ProTee VX — Ceiling-Mounted, Markerless Overhead Tracking
The ProTee VX is the tracking foundation of this package. Dual high-speed cameras capture AI-powered club and ball data with no markers, stickers, or special balls — while the ceiling mount keeps the floor open for both right- and left-handed golfers without moving hardware.
Ceiling-Mounted Tracking
Floor stays clear — no unit to trip over, no hardware to move between right- and left-handed shots.
Markerless Operation
Drop a standard ball and swing. No stickers, marked clubs, or special balls required.
AI Club & Ball Data
Dual high-speed cameras capture club and ball data with AI-powered processing.
Instant Handedness Switch
Overhead setup supports both handedness with an instant left/right switch.
Multiple User Profiles
Save profiles for every golfer in the house for quick session setup.
GSPro & TGC 2019 Ready
Compatible with GSPro, TGC 2019, and other top simulator software.
Two ProTee Swing Cameras Included With Every ProTee VX.
Ball and club numbers tell you what happened. Swing video tells you why. Every ProTee VX in this SimKit currently includes a set of two ProTee swing cameras at no additional cost — roughly a $600 value, and the same cameras other overhead systems treat as a paid upgrade.
Face-On And Down-The-Line, Synced To Every Shot.
The two included cameras set up beside and behind the hitting area, then feed directly into ProTee Labs. Video plays back side by side with the shot data from the same swing, so club delivery, ball flight, and body motion all line up in one screen instead of three separate tools.
- High frame rate swing capture
- Face-on and down-the-line angles
- Tripods or mounts sold separately
- Native ProTee Labs integration
- Video paired with shot data
- No upgrade purchase required
ProTee Labs · Dual Swing Camera Playback With Live Shot Data
Promotion Terms
The two-camera set is included with ProTee VX purchases while camera stock lasts and can end without notice. Cameras ship with the launch monitor on the same order. Tripods and camera mounts are not included. If availability changes before an order ships, Elite Sim Golf will make contact before fulfillment.
What The Cameras Need
The swing cameras connect to the same Windows PC that runs ProTee Labs and the simulator software. Camera placement, mounting options, and ProTee Labs setup are covered on the ProTee VX Setup & Support page.
24 Data Points. Plus AI-Powered Insights.
ProTee VX delivers a deep set of ball, club, and flight performance metrics for practice, fitting, and coaching — 8 measured club data points, 7 measured ball data points, and 9 calculated flight data points, all powered by AI-driven tracking through the dual high-speed cameras.
8 Club Data (Measured)
Captured directly by the dual high-speed cameras.
- Club Speed
- Swing Path
- Club Face Angle
- Club Face To Path
- Attack Angle
- Dynamic Loft
- Club Lie Angle
- Impact Point (Vertical + Horizontal)
7 Ball Data (Measured)
Captured directly at impact.
- Ball Speed
- Total Spin
- Spin Axis
- Back Spin
- Side Spin
- Launch Direction
- Launch Angle
9 Flight Data (Calculated)
Derived from measured inputs.
- Flight Path
- Apex Height
- Apex Time
- Total Distance
- Carry Distance
- Off Line
- Air Time
- Run
- Descent Angle
Plus: AI-Powered Insights & Two Included Swing Cameras
AI-driven club and ball data on every shot, plus the two swing cameras included free with every ProTee VX so face-on and down-the-line motion can be reviewed alongside shot data inside ProTee Labs, with visualizers displayed on a second monitor for a dual-screen experience.
Bought Through Official Channels.
Elite Sim Golf Is An Authorized ProTee Reseller.
Every ProTee VX in this SimKit comes direct through ProTee's authorized channel. That means full manufacturer warranty coverage, a genuine ProTee Labs perpetual license registered to the buyer, and access to ProTee Group's global support alongside direct ESG support.
- Sourced direct from ProTee
- Full manufacturer warranty honored
- Genuine ProTee Labs license
- Firmware and software update eligibility
- Direct escalation to ProTee support
- Free remote setup help from ESG
4K Projection
Optoma ZK521ST-B — 5,000 Lumen 4K With Smart Fit Auto Alignment
The Optoma ZK521ST-B is a 5,000 lumen 4K short-throw projector engineered for golf simulator use. Smart Fit auto alignment uses a smartphone camera to detect the screen frame and correct the projected image automatically, cutting installation time significantly.
Smart Fit Auto Alignment
Smartphone camera detects screen edges and auto-corrects projection — no manual keystone work.
5,000 Lumens / 4K
Bright 4K projection for sharper course detail and cleaner menus.
Golf Simulator Tuning
Optoma Smart Control includes display profiles built for GSPro and similar platforms.
Short-Throw Design
Fills the screen from a tight ceiling-mount position above the enclosure.
Choose Your Enclosure Size
Carl’s Place DIY Kit — Made-To-Order To Your Room
The Carl’s Place DIY Golf Enclosure Kit pairs a floor-to-turf impact screen with the durable BlackStop™ surround, steel corner fittings, and a zip-tie fastener set. Choose from the standard sizes below, or contact Elite Sim Golf for a fully custom build sized to your exact room (width 96″–163″, height 96″–110″, depth 18″–59″).
7.7 x 10 — 4:3
95.8″ H × 124.8″ W × 59.125″ D. 83.1″ × 110.8″ viewable.
7.7 x 13 — 16:9
95.8″ H × 163.3″ W × 59.125″ D. 84.0″ × 149.3″ viewable.
8 x 8 — 1:1
100″ H × 100″ W × 59.125″ D. 86.0″ × 86.0″ viewable.
8 x 10.5 — 4:3
100″ H × 130.3″ W × 59.125″ D. 87.2″ × 116.3″ viewable.
8.5 x 11.5 — 4:3
107.5″ H × 140.3″ W × 59.125″ D. 94.7″ × 126.3″ viewable.
9 x 12 — 4:3
112″ H × 146.3″ W × 59.125″ D. 99.2″ × 132.3″ viewable.
SimKit Standard
Beaver Tail 4ft × 8.25ft — Replaceable Hitting Strip
The Beaver Tail 4ft × 8.25ft hitting mat is the current SimKit standard. Its replaceable hitting strip means you refresh only the wear zone instead of replacing the entire mat — a meaningful advantage for a regularly used simulator bay.
4ft × 8.25ft Surface
Wide hitting and stance platform for drives, irons, wedges, and chips.
Replaceable Hitting Strip
Refresh just the wear zone when needed — no need to replace the whole mat.
Premium Stance Platform
Stable, realistic stance zone for players of any build and swing style.
Long-Term Value
The replaceable wear zone is a real ownership advantage for high-use bays.
Included Accessories
Everything Needed For A Complete Install
Beyond the primary components, this package includes the accessories needed for a real-world install — ceiling hardware, full-length cables, floor coverage, and impact protection.
Projector Install Kit
Ceiling Projector Mount, 25ft power cable, and 25ft HDMI cable — real ceiling-routing lengths, not desktop cords.
Landing Mat (6ft × 12ft)
Floor coverage in front of the hitting area for a finished bay look and consistent surface.
ProTee VX Protective Case
In-house Elite Sim Golf accessory that shields the ProTee VX unit from errant ball strikes in high-use bays.
Complete Package Contents
What’s In The Box
Every item ships together as one package. Primary components first, followed by included accessories.
ProTee VX Overhead Launch Monitor
Ceiling-mounted, markerless AI camera launch monitor. Club data, ball data, instant handedness switch, GSPro & TGC 2019 compatibility.
Carl’s Place DIY Enclosure Kit
Made-to-order floor-to-turf impact screen + BlackStop™ surround, steel corner fittings, zip-tie fastener set. Size and screen tier selected above.
Optoma ZK521ST-B 4K Projector
The Optoma ZK521ST-B is a 5,000 lumen 4K short-throw projector engineered for golf simulator use.
Beaver Tail 4ft × 8.25ft Hitting Mat
SimKit-standard hitting mat with a replaceable hitting strip.
Landing Mat — 6ft × 12ft
Floor coverage in front of the hitting area.
Ceiling Projector Mount
Hardware for proper overhead projector positioning above the enclosure.
25ft HDMI Cable + 25ft Power Cable
Full-length cables for clean ceiling-routed projector installation.
ProTee VX Protective Case
Protects the ProTee VX unit from errant ball contact in regular-use simulator bays.
For setup guides, frame assembly diagrams, and post-purchase support, visit the Simulator Assembly & Support page.
Package Specifications
SimKit Quick Specs
Buyer Profiles
Who This Package Is Built For
The Dedicated Home Builder
Converting a garage bay, bonus room, or basement into a full simulator setup with a complete package.
The Overhead Tracking Advocate
Wants the open hitting area and hands-free handedness switching that overhead systems provide.
The Premium Image Buyer
Wants true 4K projection and a projector with built-in golf simulator display tuning.
The DIY / Value Builder
Wants a made-to-order enclosure sized to the room at a lower cost.
More Options
Prefer A Different Configuration?
Build Your Own SimKit
Choose a different launch monitor, projector, enclosure, or hitting mat with the SimKit Bundle Builder — configured around your room, budget, and tracking preference.
Open the Builder →ProTee VX Launch Monitor
Full specs, measured data points, software compatibility, and ProTee Labs documentation.
View Product Page →Helpful Resources
Setup, Support & Planning
Simulator Assembly & Support
Frame assembly diagrams, setup guides, and post-purchase support for this package.
View Guides →Professional Installation
Direct install in Nashville, TN and Knoxville, TN, plus a nationwide third-party installer network.
See Installation →SimKit Bundle Builder
Build a custom package by choosing each component individually.
Open the Builder →FAQ
ProTee VX Package — Frequently Asked Questions
What enclosure sizes are available for the Carl’s Place DIY kit?
Six preset sizes are offered: 7.7x10 (4:3), 7.7x13 (16:9), 8x8 (1:1), 8x10.5 (4:3), 8.5x11.5 (4:3), and 9x12 (4:3). Fully custom sizing is also available — width 96″ to 163″, height 96″ to 110″, and depth 18″ to 59″. Select a preset here, or contact Elite Sim Golf for a custom build.
What screen material tiers are available?
Four tiers: Standard (budget, loosely woven), Preferred (smoother, silicone-reinforced), Premium (smoothest, three-layer with noise dampening), and High-Contrast Gray Premium (deeper blacks for rooms with more ambient light). Select your tier on this product.
Is the frame pipe included with the Carl’s Place kit?
Frame pipe is 1″ EMT and is sourced separately unless the Pipe Framing Kit add-on is selected on the Carl’s Place enclosure page. The kit itself includes the impact screen, BlackStop surround, steel corner fittings, and zip-tie fasteners.
How do I know the Optoma ZK521ST-B will fit my room and enclosure?
Use the Projector Fitment Tool and Throw Calculator to get the exact mounting distance for your chosen enclosure. Do not estimate throw distance manually — the tool accounts for the specific screen dimensions and install variables of each option.
What simulator software does the ProTee VX work with?
The ProTee VX is compatible with GSPro, TGC 2019, and other top simulator platforms. There are no recurring software fees for the launch monitor itself; individual simulator platforms may have their own licensing.
Does the ProTee VX require a minimum ceiling height?
Yes. As a ceiling-mounted overhead launch monitor, the ProTee VX requires a minimum ceiling height of 9 ft (108 in / 2.75 m). Confirm your ceiling height meets this requirement before purchasing.
Does the ProTee VX support both right- and left-handed golfers?
Yes. Because it mounts overhead rather than beside the mat, the ProTee VX supports both right- and left-handed golfers with an instant handedness switch and no repositioning of hardware.
Does the ProTee VX require marked clubs or special balls?
No. The ProTee VX is fully markerless — no stickers, marked clubs, or special balls are required. Use your own unmodified clubs and standard balls.
What is the ProTee VX Protective Case and why is it included?
The ProTee VX Protective Case is an accessory that shields the overhead unit from accidental ball strikes during play. Because the unit mounts above the hitting zone, it can be in the path of mishits in certain room configurations, so the case is included as a standard accessory.
Can I customize this package or swap a component?
Yes. The SimKit Bundle Builder lets you configure a fully custom package by selecting each component individually — launch monitor, projector, enclosure, hitting mat, and accessories.
Is professional installation available?
Yes. Elite Sim Golf offers direct installation in Nashville, TN and Knoxville, TN, plus a nationwide third-party installer network. See the installation services page for pricing and coverage. Product-only orders do not include installation unless arranged in advance.
How does this package ship and how long does delivery take?
This package ships free via UPS Ground to the continental United States. Components ship from Elite Sim Golf directly. For freight, delivery scheduling, or component lead times, contact the ESG team before ordering.
The ESG Difference
A Complete Simulator Package, Not A Parts List
A SimKit is a complete simulator foundation designed around launch monitor placement, projector fitment, enclosure sizing, screen ratio, hitting surface, cable management, and long-term support — all decided before the first box ships.
Complete Package Logic
Components selected to work together — not assembled from whatever ships fastest.
Fitment Guidance
Enclosure size, projector placement, screen ratio, and ceiling clearance are part of the pre-sale conversation.
Install-Ready Accessories
25ft cables, ceiling mount hardware, landing mat, and impact protection are included.
Real Post-Purchase Support
Setup questions, installation guidance, and troubleshooting after the sale.
Bottom line: ProTee VX overhead tracking, 5,000 lumen 4K projection with Smart Fit auto alignment, a made-to-order Carl’s Place enclosure, the Beaver Tail mat, install accessories, and impact protection — configured as a complete simulator bay.
