Carl's Uneekor EYE XO2 Protective Case
By Carl's Place
Build Your Dream Home Golf Simulator
Shield the Uneekor EYE XO2 From Mishits
An overhead launch monitor looks like it sits clear of flying balls and swinging clubs, until it does not. This transparent polycarbonate case installs over a mounted EYE XO2 and takes the impact instead of the sensor housing, at a fraction of the cost of replacing the unit.
Inexpensive Insurance for a High End Unit
Dependable
At ⅛ of an inch thick, the case is built to withstand what gets thrown or hit its way inside an enclosure.
Crystal Clear
Transparent polycarbonate keeps the sensor path clear so the launch monitor gathers data without interference.
Lightweight
At just 2 pounds, it does not load up the mount or the enclosure frame.
Easy Install
Slotted holes slide around the screws already holding the launch monitor to its mount. Tighten and the case is on.
No Remount Required
Installation works with the EYE XO2 already mounted. The unit does not have to come down.
Purpose Built
Cut for the EYE XO2 specifically rather than adapted from a universal shield.
Case Specifications
| Thickness | ⅛″ |
|---|---|
| Weight | 2 lb |
| Material | Transparent polycarbonate plastic |
| Compatibility | Uneekor EYE XO2 |
| Installation | Slotted holes fit over existing launch monitor mounting screws |
| Data interference | None — the clear panel keeps the sensor path unobstructed |
Other Launch Monitor Shields
Impact protection is available for other overhead and floor based launch monitors in the catalog.
Protect the Investment Before It Matters
Fitment questions, ceiling height checks, and compatibility confirmations are handled before the order ships.
Contact UsFrequently Asked Questions
Which launch monitor does this fit?
The Uneekor EYE XO2 only. It is not a fit for the EYE XO, EYE XR, or QED.
Will it affect data accuracy?
No. The case is made from transparent polycarbonate so the launch monitor gathers data without interference.
How thick is it?
One eighth of an inch.
How much weight does it add?
About 2 pounds, so it does not meaningfully load the mount or enclosure.
How does it install?
Once the EYE XO2 is mounted, slide the case’s slotted holes around the screws holding the launch monitor to the mount, then tighten the screws.
Do I need to remove the launch monitor to install it?
No. The slotted design lets the case go on with the unit still mounted.