Carl's Floor Edges for Width of Room, Qty 6
By Carl's Place
Build Your Dream Home Golf Simulator
Pair the Carl's Floor Edges for Width of Room, Qty 6 with a launch monitor, projector, and hitting mat in the SimKit Builder.
Start Building in the SimKit Builder →Carl’s Floor Edges for Width of Room, Qty 6
Tapered tall edge pieces that finish the front and back of a tiled subfloor (the left-to-right runs of the room). They create a smooth, tripping-hazard-free transition and hold turf in neatly at the border.
Runs Along the Depth of the Room
Width Edge = Front/Back
Placed along the front and back of the room, running left to right. Pair with depth edges (left/right) to finish the full perimeter.
Tapered, Tall Profile
An inner lip and tapered tall edge hold turf in neatly at the border, avoiding a tripping hazard where the flooring ends.
Optional, Not Required
Tiles alone form a complete subfloor. Edges are recommended for a finished look, especially when turf is laid on top.
Edge Piece Dimensions
| Edge piece size | 41.25″ x 5.25″ x 1.25″ (inner lip) (variance of up to 1/8″) |
| Pack quantity | 6 edge pieces per pack |
| Placement | Front and back of the room (width direction, left to right) |
| Pairs with | Depth Edges (left/right) and Corner pieces to complete the perimeter |
Most rectangular rooms need both depth edges and width edges to finish the full perimeter, plus one pack of corner pieces where they meet.
Planning a Full Room?
See the full sizing guide, worked example, and all 5 components of the Floor Tile System in one place.
Shop the Rest of the System
Pair depth edges with width edges and a pack of corners to finish the full perimeter around the tiled subfloor.
Width Edges, Qty 6
A Clean Edge Makes the Bay Look Finished
Pair depth edges with width edges and a pack of corners for a tripping-hazard-free border under turf or a hitting mat.
Contact UsCommon Questions
What is the difference between depth edges and width edges?
Depth edges run along the left and right sides of the room (front to back). Width edges run along the front and back of the room (left to right). Most rectangular rooms need both types.
How many packs of width edges do I need?
Count how many tile-widths run along the front and back of the room, then divide by 6 (pack quantity) and round up. The Floor Tile System landing page has a full worked example.
Are these edges required, or optional?
Optional. The floor tiles alone form a complete subfloor. Edge pieces add a finished, tapered perimeter and are recommended when turf is laid on top of the tile system.
Do I still need corner pieces if I order both edge types?
Yes, corner pieces complete the perimeter where a depth edge and a width edge meet. Most setups only need one pack of 4.
