Carl's Place Pro Enclosure Pipe Framing Kit
By Carl's Place
Build Your Dream Home Golf Simulator
Pair the Carl's Place Pro Enclosure Pipe Framing Kit with a launch monitor, projector, and hitting mat in the SimKit Builder.
Start Building in the SimKit Builder →Carl’s Pro Enclosure Pipe Framing Kit
Pre-cut 2″ EMT pipes sized to the exact enclosure selected, cut and ready for assembly. Skip sourcing electrical metal tubing locally and cutting each length by hand — every pipe in the kit is pre-measured to the frame diagram for the size and depth ordered.
Built to Match the Pro Enclosure
Exact-Length Cuts
Every pipe is pre-cut to the precise lengths specified in the enclosure’s custom assembly diagram — no measuring or cutting EMT on site.
Matches Frame Spec
Uses the same 2″ EMT (true OD 2.197″) required by the Pro Enclosure frame — standard PVC will not work with the enclosure’s fittings.
Saves Sourcing Time
2″ EMT can be difficult to find at typical hardware stores. This kit removes that step entirely.
Priced to Match Enclosure Size
| Size (W x D) | 5’ Depth | 8’ Depth | 10’ Depth | 15’ Depth |
|---|---|---|---|---|
| 8’ x 10.5’ | $910.00 | $1,035.00 | — | — |
| 8.5’ x 11’ | $945.00 | $945.00 | — | — |
| 8.5’ x 14.5’ | $1,055.00 | $1,180.00 | — | — |
| 9’ x 12’ | $995.00 | $1,120.00 | $1,200.00 | $1,410.00 |
| 10’ x 13’ | $1,055.00 | $1,180.00 | $1,265.00 | $1,475.00 |
| 10’ x 15.5’ | $1,135.00 | $1,260.00 | $1,340.00 | $1,550.00 |
Price scales with both enclosure width and depth since the kit supplies the full pipe length for the frame. Select the same size and depth as the Pro Enclosure Kit ordered.
| Pipe Type | 2″ EMT (electrical metal tubing) |
| True Outer Diameter | 2.197″ (55.8mm) |
| Cut Lengths | Pre-cut to match the ordered enclosure size and depth |
| Shipping | Ships via freight on a pallet of 50lb boxes — lift-gate service recommended |
| Compatibility | Pro Golf Simulator Enclosure Kit only — not for standard 1-1/4″ ESG enclosures |
Ordering the Pro Enclosure Kit?
Match this add-on to the enclosure size and depth selected at checkout.
Carl’s Pro Enclosure Pipe Framing Kit
Order the Pipe Framing Kit alongside the Pro Enclosure Kit to receive every frame pipe pre-cut and ready for the ∼2-hour assembly.
Contact UsCommon Questions
Do I need the Pipe Framing Kit to build the enclosure?
No. The enclosure works with 2″ EMT sourced locally, and the included custom diagram specifies exact cut lengths. This kit is a convenience option that arrives pre-cut and ready to assemble.
What size EMT does the Pro Enclosure require?
2″ EMT (electrical metal tubing) with a true outer diameter of 2.197″ (55.8mm). PVC pipe will not work with the enclosure’s fittings.
How does this kit ship?
Via freight on a pallet of 50lb boxes. Lift-gate service is recommended if you are unable to unload a pallet without one.
Does the price change with enclosure depth?
Yes. Unlike the other Pro Enclosure add-ons, the Pipe Framing Kit is priced by both size and depth since deeper enclosures require longer pipe runs.
