Carl's Place Launch Monitor Ceiling Drop-Mount Kit
By Carl's Place
Build Your Dream Home Golf Simulator
Pair the Carl's Place Launch Monitor Ceiling Drop-Mount Kit with a launch monitor, projector, and hitting mat in the SimKit Builder.
Start Building in the SimKit Builder →
Drop an Overhead Launch Monitor to the Correct Height
This kit suspends an overhead launch monitor from the ceiling on an extender column, letting the unit hang at its required mounting height in rooms where the ceiling is higher than the launch monitor spec allows. Drop length is adjustable during installation. Mounts to wood joists or structural ceilings.
Height Control for Tall and Angled Ceilings
Adjustable Drop
Drop length is set during installation rather than fixed at the factory, so the launch monitor can be brought down to its specified mounting height.
Extender Column
The kit accepts an extender column sized to the room. Longer columns cover ceilings well above standard launch monitor mounting height.
Angled Ceiling Option
An angled ceiling plate is available for vaulted and cathedral ceilings. Selecting the angled plate changes the effective drop range.
Structural Mounting
Mounts to wood joists or structural ceilings. Not intended for unsupported drywall.
Dual Cord Management
Cabling routes either through the mount tube for a fully concealed run or directly through the ceiling plate.
Complete Hardware
Ships with installation instructions and the hardware required for the selected configuration.
How to Order
| Launch Monitor | Select the unit so the mounting plate bolt pattern matches. Nine plate options are available. |
|---|---|
| Ceiling Plate | Select Flat Ceiling for a standard level ceiling or Angled Ceiling for a vaulted or cathedral ceiling. Both plates cost the same, and the kit ships with the plate selected. |
| Extender Length | 6″–9″, 12″–18″, 2′–3′, or 3′–5′. Measure from the finished ceiling to the target launch monitor height. |
| Cord Routing | Through the mount tube or through the ceiling plate. Decided at installation, not at order time. |
Verify Projector and Monitor Do Not Conflict
A suspended launch monitor and a ceiling mounted short-throw projector occupy overlapping ceiling space. Confirm both mounting positions against room depth and ceiling height before installation.
Use the Projector Fitment ToolGet the Drop Length Right the First Time
Fitment questions, ceiling height checks, and compatibility confirmations are handled before the order ships.
Contact UsFrequently Asked Questions
How do I choose the extender length?
Measure from the finished ceiling down to the launch monitor mounting height specified by the manufacturer. The difference is the required drop. Select the extender range that covers it.
Will this work on a vaulted ceiling?
Yes, using the angled ceiling plate. Select Angled Ceiling from the Ceiling Plate dropdown and the kit ships with the angled plate at no additional cost. Measure the drop at the actual mounting point, not at the ceiling peak, because the angled plate changes the effective drop range.
What does it mount to?
Wood joists or a structural ceiling. It is not intended for mounting into unsupported drywall.
Where do the cables run?
Either through the mount tube for a concealed run or directly through the ceiling plate. Both paths are supported by the same kit.
Is the drop length fixed?
No. Within the selected extender range the drop is adjustable during installation.
Does this replace the Pro Enclosure frame mount?
It is an alternative. The frame mount clamps to enclosure pipe framing, while this kit suspends from the ceiling and is used when frame mounting is not practical.